Arsenic leaves part of the world's copper without a buyer. Fortescue has sold its first 40 clean tonnes
After four years at a demonstration plant in Brisbane, a low-temperature hydrometallurgical process cut arsenic in concentrates from up to 7% to below 0.25% — and the product has already been sold.
- Fortescue has sold more than 40 tonnes of copper concentrate treated with the Toowong Process, a hydrometallurgical route that removes arsenic without roasting.
- The feed concentrate contained up to 7% arsenic; the product came out below 0.25%, retaining more than 99.9% of the copper over seven campaigns and more than 3,000 hours of testing.
- Arsenic is one of the main penalty elements in concentrate: China, the largest buyer, has barred imports above 0.5% since 2006.
- The next target is the Cañariaco project in Peru, where the technology could turn hard-to-sell resources into mineable inventory.
On 19 October, Fortescue announced it had sold the first 40-plus tonnes of clean copper concentrate produced at its demonstration plant in Brisbane, Australia. The material went through the Toowong Process, a patented technology the miner bought in 2022 and has been testing ever since. The concentrate that entered the plant contained up to 7% arsenic. What came out contained less than 0.25%. Across seven campaigns and more than 3,000 hours of operation, the process kept arsenic below 0.3% and preserved more than 99.9% of the contained copper. The route is hydrometallurgical, at low temperature and low pressure, and locks the arsenic into a stable solid residue. According to the company, capital and operating costs are comparable to those of roasting, the conventional method. The next step is to test concentrate from Cañariaco, a copper project in northern Peru that Fortescue took full control of in March 2026, when it completed the purchase of Alta Copper for about C$139 million.
Concentrate is not just copper grade. Whoever sells concentrate also sells everything that comes with it. Smelter contracts carry a table of penalty elements — arsenic, antimony, bismuth, mercury, fluorine, among others — and every tenth of a percentage point above the limit is discounted from the price. Above a certain level there is no discount: there is no buyer. China, destination of most of the copper concentrate traded in the world, has prohibited since 2006 the entry of lots with more than 0.5% arsenic. A concentrate with 2% or 3% simply does not get in. That is why arsenic shapes the mine plan, not just the plant. When a deposit has zones rich in enargite or tennantite — copper minerals that carry arsenic in their own structure — miners usually do one of three things: blend dirty ore with clean ore to dilute the average, treat the concentrate at specific facilities, or simply leave part of the orebody out of the inventory. Each of these options costs money or reserves. That is why Fortescue talks about "converting resources into inventory": the same rock becomes worth mining if arsenic stops being a commercial veto. The traditional route solves one problem by creating another. Roasting heats the concentrate to volatilise the arsenic. It works, but it consumes a lot of energy, emits gases, requires complex infrastructure and generates dust and gas containing water-soluble arsenic — which must be captured and stabilised. The hydrometallurgical alternative described by Fortescue swaps the furnace for aqueous chemistry and delivers the arsenic already locked in a stable solid. For the process engineer, the key question stops being "can we remove the arsenic?" and becomes "in what form does it leave, and where will it stay forever?". A demonstration with a sale is a different step from a demonstration with a lab report. Many metallurgical technologies die between pilot and commercial scale because the product was never tested by a real buyer. Selling 40 tonnes is little in volume — an average mine produces that in hours — but it answers the question that holds up financing: will the smelter accept it? Fortescue says yes. What remains to be proven is performance at industrial scale and with concentrates from different sources, starting with Cañariaco. The root of the issue is geological. "Clean", easily accessible copper deposits are running out. What remains tends to be deeper, lower grade and more contaminated. In this scenario, impurity-removal technologies become a kind of mineral exploration without a drill rig: they increase available reserves without discovering a single new tonne.
Copper demand is expected to grow by more than 50% by 2050, according to Fortescue itself, to at least 50 million tonnes a year. Much of the copper not yet mined sits in arsenic-bearing deposits — in the Andes in particular. If routes like Toowong prove themselves at scale, they change the feasibility maths of projects that today sit on the shelf because of the chemistry of the concentrate, not the geology of the grade. For Brazil, which exports copper concentrate from Carajás and is seeing growing interest in new copper projects, the issue is direct: concentrate quality is part of the asset's value, and understanding the penalty table is a competence for geologists, process engineers and commercial analysts alike.
What did we learn?
- Impurities such as arsenic can take a copper concentrate off the market — China has barred lots above 0.5% since 2006.
- Removing arsenic at the plant changes the mine plan: resources once discarded can become mineable inventory.
- In metallurgy, a technology only leaves the pilot stage when a real buyer accepts the product — and when it is clear where the contaminant will end up.
Skills Radar
- Hydrometallurgy★★★★★
- Concentrate marketing★★★★★
- Geometallurgy★★★★★
- Hazardous waste management★★★★★
Skills Developed
- Hydrometallurgy
- Concentrate quality
- Mine planning
Upward trend
As clean copper deposits are depleted, the share of concentrates with impurities tends to rise, and with it the value of clean-up routes that avoid roasting.
Who is this content useful for?
- Engineers
- Geologists
- Researchers
- Managers
- Students
To go deeper on this topic
Worth pursuing training in:
- Mining Engineering
- Metallurgical Engineering
- Mineral Processing
- Geometallurgy
- Chemical Engineering


