An adapted flotation cell recovered from tailings the coarse copper the plant was letting slip
Glencore Technology tests at the Tintaya plant in Peru recovered almost a quarter of the coarse copper particles lost to tailings, with small changes to a Jameson Cell. The case shows where recovery losses hide in circuits that seem well tuned.
- Glencore Technology tested a modified Jameson Cell as a scavenger stage on the tailings of Antapaccay's Tintaya plant in Peru.
- The target was copper particles above 150 micrometres; the cell recovered on average 24.7% of them, upgrading the material about 5.3 times.
- The coarse concentrate returns to rougher flotation, and the estimate is a 2% to 6% gain in the circuit's overall copper recovery.
- The changes were limited to the downcomer design and the operating philosophy, with no plant rebuild.
On October 6, 2026, Glencore Technology released results of tests carried out at the Tintaya concentrator, operated by Antapaccay in southern Peru. The company adapted a Jameson Cell, a high-intensity flotation unit it sells itself, to work as a scavenger on the tailings stream. The focus was copper-bearing particles larger than 150 micrometres. The changes were small: adjustments to the design of the downcomer, the tube where slurry and air mix, and to the way the cell is operated. Average recovery of the target particles was 24.7%, with an upgrade of about 5.3 times. The coarse concentrate obtained is returned to the rougher circuit. The company projects that this will raise the circuit's total copper recovery by between 2% and 6%. The next planned steps are to validate the result with other ore types and under other operating conditions.
Flotation has a particle-size window in which it works well. Very fine particles have little chance of colliding with a bubble. Coarse particles collide, but they let go: they are heavy, and turbulence in the tank tears the particle off the bubble before it reaches the froth. On top of that, a coarse particle is often composite — a grain of copper sulfide attached to gangue. The exposed hydrophobic surface is too small to hold the whole thing. The result is familiar in concentrators: the recovery-by-size-fraction curve drops at both ends, and coarse copper goes to the tailings dam. The traditional answer is to grind finer. But grinding is the most energy-intensive stage in a concentrator, and grinding everything finer to save a small fraction rarely pays off. The Tintaya test takes the opposite path. It accepts that the main circuit will lose some of the coarse material and adds a stage dedicated to fishing it out of the tailings. A high-intensity cell like the Jameson generates large numbers of fine bubbles and rapid contact in the downcomer. That favors capture before the particle detaches. The case leaves three practical lessons. Diagnostic: a plant's overall recovery hides losses concentrated in specific fractions, and only analysis of tailings by size range reveals where the escaping copper is. Engineering: a 2% to 6% recovery gain came from adapting existing equipment, not from a new design. Method: the result holds for one ore and one operating condition. The company itself treats generalization as the next step, which is the right stance for a test at a single plant.
In copper, each percentage point of recovery at a large concentrator represents thousands of tonnes of metal a year, sold without mining a single extra tonne. With falling grades and pressure for less energy per tonne, recovering coarse particles from tailings is an alternative to finer grinding. For process engineers and plant metallurgists, the case reinforces the value of metallurgical balances by size fraction and of scavenger tests before large investments in grinding.
What did we learn?
- Coarse particles are lost in flotation because they detach from bubbles and often have little exposed mineral surface.
- A dedicated scavenger stage on tailings can be a cheaper alternative to grinding all the ore finer.
- Analyzing tailings by size range is the starting point for finding where the plant loses metal.
Skills Radar
- Coarse particle flotation★★★★★
- Size analysis of tailings★★★★★
- Design of industrial plant trials★★★★★
- Energy efficiency in comminution★★★★★
Skills Developed
- Mineral flotation
- Metallurgical balance
- Beneficiation circuit optimization
Upward trend
with falling copper grades and rising grinding energy costs, technologies that recover coarse particles from tailings should gain ground in existing plants.
Who is this content useful for?
- Engineers
- Technicians
- Researchers
- Students
- Managers
To go deeper on this topic
Worth pursuing training in:
- Mineral processing
- Mineral process engineering
- Extractive metallurgy


