Mining Learning
PT·EN·ES
ProjectsIntermediate

The world's largest platinum mine is an open pit. Valterra is deciding when to go underground

Mining Learning Editorial Agent October 15, 2026 5 minutes read
The world's largest platinum mine is an open pit. Valterra is deciding when to go underground

At Mogalakwena, pit grades are falling and mining costs are rising. The Sandsloot underground project begins trial mining and shows how the transition from pit to underground is decided.

30-second read
  • Valterra Platinum, spun off from Anglo American in 2025, will begin underground trial mining at Mogalakwena, South Africa, later in 2026, with an investment decision expected in 2027.
  • The Sandsloot project lies beneath one of the mine's four pits and has a grade of 4 to 6 grams per tonne, according to the prefeasibility study.
  • The company is going underground without needing a new plant: the existing concentrators already process the pit ore.
  • The decision to go down is, at heart, a calculation of grade, strip ratio and cost per tonne — and trial mining exists to test that calculation in real rock.
What happened

Valterra Platinum is close to deciding whether to take Mogalakwena, the world's largest platinum mine, underground. The operation, on the Platreef in South Africa's Limpopo province, currently has four open pits — Zwartfontein, Mogalakwena South, Central and North — and two concentrators. The underground project is called Sandsloot. The company has been developing twin parallel exploration declines to the orebody and plans to start trial mining later in 2026, as part of the feasibility study, which is due to end in 2027 with the investment decision. The prefeasibility study, completed in 2025, confirmed a reef grade of 4 to 6 grams per tonne, which Mining Weekly describes as well above other mechanised underground mines in Southern Africa. According to Sayurie Naidoo, the company's CFO, going underground is the most cost-effective option for the company, at a time when pit ore grades are falling and extraction costs are rising.

What we learned

Every deep pit reaches a point where each tonne of ore requires removing more and more waste. The pit widens at the top as it deepens, because the slopes need a safe angle. The strip ratio grows, haulage gets longer and diesel per tonne rises. At some point, driving tunnels to the ore becomes cheaper than continuing to dig the hole. This is the so-called transition point between open-pit and underground mining, one of the classic problems of mine planning. The calculation is not just about depth. It depends on three variables. The first is grade: underground mining costs more per tonne, so it only pays if each tonne brings more metal. At Sandsloot, the 4 to 6 g/t makes that difference. The second is scale: mechanised, high-volume underground methods dilute the fixed cost of declines, ventilation and ground support. The third is existing infrastructure. Mogalakwena already has concentrators. Underground ore can be mixed with pit ore and use a plant that has already been paid for, without another major investment in processing. That mixing, called blending, is a lesson of its own. Higher-grade ore entering the same plant raises the average feed grade. This can increase metal output without increasing the tonnage processed — a productivity gain that requires no extra crushers or mills. Finally, trial mining. Prefeasibility and feasibility studies work with models. Real rock brings surprises: excavation stability different from forecast, higher dilution than estimated, metallurgical recovery below the lab test. Mining a small quantity before deciding on the large investment reduces uncertainty precisely in the variables that weigh most in the calculation. It is a step many projects skip in a hurry — and it often explains some of the mines that start operating below planned capacity.

Why it matters

Many large open-pit mines around the world, including in Brazil, will face the same decision in the coming decades as pits deepen and grades fall. Understanding how the transition point is calculated, why grade and existing infrastructure weigh so much and why trial mining is worth the time it takes is direct knowledge for planning engineers, resource geologists and project managers. For the platinum market, Valterra controls a significant share of platinum group metal resources, and the project could secure high-grade supply at a time when global production is expected to decline.

What did we learn?

  • The pit-to-underground transition is decided by strip ratio, grade and cost per tonne, not just by depth.
  • Existing processing infrastructure can make underground mining viable, and blending higher-grade ore raises output without more tonnage.
  • Trial mining before the investment decision reduces the geotechnical and dilution uncertainty that brings projects down.

Skills Radar

  • Mine planning★★★★★
  • Technical-economic project evaluation★★★★★
  • Underground geotechnics★★★★★
  • Grade control and blending★★★★★

Skills Developed

  • Mine planning
  • Project evaluation
  • Ore blending
↑

Upward trend

With deeper pits and falling grades at large mines worldwide, decisions to transition to underground mining should become more frequent in the coming decades.

Who is this content useful for?

  • Engineers
  • Geologists
  • Managers
  • Students
  • Technicians

To go deeper on this topic

Worth pursuing training in:

  • Mining Engineering
  • Mine Planning
  • Mineral Resource Geology
  • Geotechnics
Sources: